Agricultural Equipment
Articles
Email Signup
Sell Your Machines
Agricultural Equipment
Agricultural Dealers
Agricultural Articles
Email Signup
Sell Your Machines
Mon June 06, 2016
Agricultural Equipment Guide
Virnig Manufacturing Inc.'s new brush cutter attachment, the Virnig V50 open front brush cutter, is designed to rough-cut dense brush and clear trees up to 4 in. (10 cm) in diameter. The three-blade cutting system, mounted to a flywheel ensuring flywheel bounces off stumps rather than catching and damaging the motor.
This skid steer brush cutter also features:
• Standard dual hydraulic pressure relief valves with dynamic braking to stop the 250 to 275 lb. flywheel in under 10 seconds.
• Two standard flow and two high flow Eaton motor configurations ensure optimum performance and longevity.
• Tall push bar at the front provides rigidity and helps push over thick brush and trees.
• Able to cut down to the ground to limit regrowth.
• Double-sided, 5/8 by 5 in. (1.5 by 12.7 cm) blades can be flipped over to utilize second sharpened edges.
• Standard replaceable front skid shoes to increase the mower deck's wear life.
Available in 60 to 78 in. (152 to 198 cm) cut widths with a recommended flow rate of 14 to 42 gpm (53 to 159 Lpm).
All Virnig products are backed by a one-year warranty, and the skid steer attachments are USA made and built with a universal mount to fit most skid steer loaders including: Bobcat, Caterpillar, ASV, Case, Daewoo, Gehl, JCB, John Deere, Kubota, Mustang, New Holland, Takeuchi, Terex, Volvo, Wacker-Neuson and others.
For more information, call 800/648-2408 or visit virnigmfg.com.
This story also appears on Construction Equipment Guide.