Agricultural Equipment
Articles
Email Signup
Sell Your Machines
Agricultural Equipment
Agricultural Dealers
Agricultural Articles
Email Signup
Sell Your Machines
Most vehicles with 72 in. or greater hinge pin height may use standard 4-ft.-length augers.
Tue May 04, 2021
Danuser
Danuser has introduced a new mounting system to make its EP Auger compatible for mini skid steers. The auger features a planetary gear drive that is up to 42 percent stronger, with greater torque for drilling through hard-compacted surfaces, according to the manufacturer.
"Models range from 6 to 35 gpm and from 1,500 to 3,500 psi, making this a very versatile tool for the construction and agricultural industries," said Glenn Danuser, company co-owner.
Other features include the following:
- The mount utilizes the same EP unit with the housing (no need to stock a special unit).
- Swings from a knuckle to allow left-to-right, forward-to-back leveling.
- Most vehicles with 72 in. or greater hinge pin height may use standard 4-ft.-length augers. Hinge pin heights 71 in. or shorter require 3-ft.-length augers, maximum.
Mounts also are available for front-end loaders, backhoes, excavators and other skid steer models.
For more information, visit Danuser.com.
This story also appears on Construction Equipment Guide.