Yes : ✔ No : ✖ Good : ●●● Fair : ●● Poor : ● |
| GENERAL CONDITION |
| Machine Starts and is Operable | ✔ |
| GENERAL APPEARANCE |
| Cleaning Required | ✔ |
| SAFETY ITEMS |
| Back Up Alarm | ●●● |
| Horn | ●●● |
| ROPS | ●●● |
| OPERATOR STATION |
| Current O&MM | ✔ |
| Current Safety Manual | ✔ |
| ENGINE |
| Blow By | ✖ |
| Fuel Leaks | ✖ |
| Knocking | ✖ |
| Oil Leaks | ✖ |
| Water in Oil | ✖ |
| COOLING SYSTEM |
| Coolers | ●●● |
| Fan | ●●● |
| Radiator | ●●● |
| Water Pump | ●●● |
| ELECTRICAL, STARTING AND CHARGING SYSTEM |
| Alternator | ●●● |
| Batteries / Cables | ●●● |
| Starter | ●●● |
| Wiring | ●●● |
| TRANSMISSION |
| Leaks - TRANSMISSION | ✖ |
| Transmission - Noisy | ✖ |
| STEERING |
| Steering Linkage | ●●● |
| Steering Operating Condition | ●●● |
| HYDRAULICS |
| Angle Cylinder | ●●● |
| Control Linkage - HYDRAULICS | ●●● |
| Hose Lines | ●●● |
| Lift Cylinders | ●●● |
| Overall Operating Condition | ●●● |
| Tilt Cylinder | ●●● |
| BLADE |
| Cutting Edge & Bits | ●●● |
| Face / Moldboard | ●●● |
| Knuckle | ●●● |
| Pins | ●●● |
| Trunnions | ●●● |
| RIPPER / GRAPPLE / WINCH |
| Beam / Frame | ●●● |
| Pins & Bushings | ●●● |
| Ripper Lift Cylinder | ●●● |
| Shanks / Get | ●●● |
| UNDERCARRIAGE |
| Pins & Bushings Turned? | ✖ |
| FINAL DRIVES |
| Housings, Left | ●●● |
| Housings, Right | ●●● |
| Planetaries / Differential, Left | ●●● |
| Planetaries / Differential, Right | ●●● |
| COMMENTS, MISC. REPAIRS, GENERAL REMARKS |
| Pins & Bushings Turned? | V-Pat, LGP, MS ripper, Cross slope enabled. |
| Pins & Bushings Turned? | Operational video attached |